© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Allowable Stress Design of Masonry #4: Wall Design for In-Plane Loads & Seismic Detailing
Shear walls are critical building elements to resist in-plane loads and are, for masonry, the wind and seismic-force-resisting system. This session reviews Allowable Stress Design of shear walls along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls. Design for in-plane shear, including shear friction, and in-plane flexure is explored and examples provided. The effect of openings are also be examined.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00
Description
Shear walls are critical building elements to resist in-plane loads and are, for masonry, the wind and seismic-force-resisting system. This session reviews Allowable Stress Design of shear walls along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls. Design for in-plane shear, including shear friction, and in-plane flexure is explored and examples provided. The effect of openings are also be examined.
Learning Objectives:
- Introduce masonry shear walls and applied loads on these critical elements
- Discuss seismic detailing requirements for masonry shear walls
- Review the Allowable Stress design provisions for masonry shear walls for combined axial load and bending and for shear
- Discuss maximum and minimum reinforcement limits and detailing of shear walls when using Allowable Stress Design
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
Related products
-
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
This lesson will review the basics of masonry construction so that those observing or accessing that construction are aware of common procedures and practices. Tolerances of units and construction will be reviewed so that those constructing masonry, or judging that construction know whether the resulting work is reasonable and within common tolerances. Movement joints including control joints and expansion joints will also be reviewed as to why they may be needed, what is important to make them function properly, and how they are commonly constructed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
MaterialsSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
$75.00 Add to cartSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
This lesson will review the basics of masonry unit production and properties with a specific focus on those items inspectors and construction personnel would need to know about or confirm. Common concrete masonry units and clay masonry units will be discussed, along with key differences in these materials. Limitations on manufacturing that need to be understood by those using the units will be discussed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00