Anchor Bolt Design
This lesson covers the basis for these changes two major changes to the anchor bolt design provisions in the 2016 edition of TMS 402. One change was to increase the calculated shear crushing strength by 67%. The other change was to go from a linear interaction equation for combined bending and shear to an elliptical interaction equation.
$75.00
Description
There were two major changes to the anchor bolt design provisions in the 2016 edition of TMS 402. One change was to increase the calculated shear crushing strength by 67%. The other change was to go from a linear interaction equation for combined bending and shear to an elliptical interaction equation. This lesson covers the basis for these changes. In addition to the changes in TMS 402, ASCE 7-16 reduced the required load increase for seismic applications when the anchor bolt failure is not yielding from 2.5 to 2.0. The lesson also covers general anchor bolt design in masonry, provides practical design tips, and shows examples of anchor bolt design.
Learning Objectives:
- Understand the changes, and the basis for the changes, to anchor bolt design provisions in TMS 402.
- Understand the design of anchors bolts in tension.
- Understand the design of anchor bolts in shear.
- Understand the design of anchor bolts in combined tension and shear.
Related products
-
An Overview of the Role of Masonry in Sustainable Design and LEED v4
This lesson will address LEED v4 credit categories, with particular emphasis on the Materials and Resources credits, and identify how masonry products can contribute to sustainable design and LEED.
SKU: LMS1802 Categories: Design, Free for Members, Materials, Sustainability$75.00 -
Nondestructive Evaluation and Testing of Masonry
Nondestructive evaluation methods are valuable approaches for evaluating conditions of existing masonry construction without causing damage. Masonry strength can also be measured in place using in situ test methods, without resorting to destructive sample removal for laboratory testing.
SKU: LMS1704 Categories: Construction, Free for Members, Grout, Masonry Testing, Mortar, Reinforcement$75.00 -
Exterior Masonry Walls and Energy Code Compliance
This lesson provides an overview of energy code provisions, reviews energy studies performed utilizing whole building analysis, and provides recommendations for cost effective energy efficient solutions for energy efficient exterior masonry wall designs.
SKU: LMS1703 Categories: Codes & Standards, Free for Members$75.00 -
Strength Design of Masonry
This lesson reviews the design assumptions for strength design, and look at the design of beams, bearing walls, and shear walls using strength design.
SKU: LMS1702 Categories: Design, Free for Members, Strength Design$75.00