© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Allowable Stress Design of Masonry – All Lessons
This 6-session webinar series will introduce Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. Presenters will discuss design methodology as well as design for flexure, axial loads, and in-plane loads. The series will conclude with a review of requirements for reinforcement and connectors and detailing masonry effectively.
- Session 1 – Introduction to Allowable Stress Design of Masonry and Design Methodologies, Presented by W. Mark McGinley
- Session 2 – Design of Beams, Presented by Scott W. Walkowicz
- Session 3 – Design of Walls for Axial Load and Out-of-Plane Loads, Presented by W. Mark McGinley
- Session 4 – Wall Design for In-Plane Loads & Seismic Detailing, Presented by Scott W. Walkowicz
- Session 5 – Design of Columns and Pilasters & Out of Plane Load Distribution, Presented by W. Mark McGinley
- Session 6 – Reinforcement & Connectors, Presented by Scott W. Walkowicz
This product provides access to all 6 Allowable Stress Design of Masonry lessons.
$420.00
Description
This 6-session webinar series will introduce Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. Presenters will discuss design methodology as well as design for flexure, axial loads, and in-plane loads. The series will conclude with a review of requirements for reinforcement and connectors and detailing masonry effectively.
Presented by W. Mark McGinley, Ph.D, PE, FASTM, FTMS, University of Louisville & Scott W. Walkowicz, P.E., Walkowicz Consulting Engineers, LLC
- Session 1 – Introduction to Allowable Stress Design of Masonry and Design Methodologies, Presented by W. Mark McGinley
- Session 2 – Design of Beams, Presented by Scott W. Walkowicz
- Session 3 – Design of Walls for Axial Load and Out-of-Plane Loads, Presented by W. Mark McGinley
- Session 4 – Wall Design for In-Plane Loads & Seismic Detailing, Presented by Scott W. Walkowicz
- Session 5 – Design of Columns and Pilasters & Out of Plane Load Distribution, Presented by W. Mark McGinley
- Session 6 – Reinforcement & Connectors, Presented by Scott W. Walkowicz
Allowable Stress Design of Masonry Night School is an excellent way to learn allowable stress design procedures. Attendees should have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Night School Series).
Related products
-
Allowable Stress DesignAllowable Stress Design of Masonry #6: Reinforcement & Connectors
$75.00 Add to cartAllowable Stress Design of Masonry #6: Reinforcement & Connectors
Reinforcement and connectors are essential to ensure a proper load path in masonry buildings. This session reviews basic detailing requirements for reinforcement and connectors and specific requirements for their design when using allowable stress procedures for masonry. Lap length requirements for reinforcement, use of hooks and confinement bars, and the design of anchor bolts are also be reviewed.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00 -
Allowable Stress DesignAllowable Stress Design of Masonry #3: Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartAllowable Stress Design of Masonry #3: Design of Walls for Axial Load and Out-of-Plane Loads
During this session, allowable stress design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed. Differences in the Allowable Stress design provisions and strength design procedures will be briefly discussed, especially the secondary bending moments.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00 -
Allowable Stress DesignAllowable Stress Design of Masonry #1: Introduction to Allowable Stress Design
$75.00 Add to cartAllowable Stress Design of Masonry #1: Introduction to Allowable Stress Design
This introductory course reviews basic allowable stress design concepts. Dr. McGinley presents key differences between allowable stress design and strength design procedures. This session also reviews masonry assemblies and systems, noting their purposes and resistance to primary loads. Attendees will learn about typical masonry building elements and their roles in the overall structural system including walls, beams, columns, and pilasters. Future sessions of the series discuss the design of these elements. Finally, this session reviews loads and load combinations from ASCE-7 & and the IBC.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00 -
SeriesAssessment, Maintenance, and Repair of Transitional Masonry Structures – All Lessons
$472.50 Add to cartAssessment, Maintenance, and Repair of Transitional Masonry Structures – All Lessons
In this 7-session series, instructors discuss the most common issues in assessing, maintaining, and where needed, repairing masonry cladding systems constructed in North America between the 1880 and 1945. Specific sessions will address:
- Session 1 – Review of Common Masonry Materials
- Session 2 – Masonry Systems
- Session 3 – Planning and Conducting a Transitional Masonry Building Investigation
- Session 4 – Testing and Analysis
- Session 5 – Rehabilitation Options for Transitional Masonry
- Session 6 – Implementation of a Rehabilitation Project for Transitional Masonry
- Session 7 – Developing a Maintenance Plan for Existing Masonry
This product provides access to all 7 lessons of this series.
$472.50