Special Inspection of Structural Masonry #7 – Reinforcing and Grouting
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Related products
-
Design
Strength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
$75.00 Add to cartStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2105 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Construction
Special Inspection of Structural Masonry #6 – Basic Masonry Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
This lesson will review the basics of masonry construction so that those observing or accessing that construction are aware of common procedures and practices. Tolerances of units and construction will be reviewed so that those constructing masonry, or judging that construction know whether the resulting work is reasonable and within common tolerances. Movement joints including control joints and expansion joints will also be reviewed as to why they may be needed, what is important to make them function properly, and how they are commonly constructed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1908 Categories: Construction, Member Discount-75, Special Inspection of Masonry Series$75.00 -
Special Inspection of Structural Masonry #5 – Grout
This lesson is designed to provide a thorough understanding of grout for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of grout for masonry construction, both fine and coarse, as well as conventional and self-consolidating mixes, and desirable properties for all of these. It describes the materials that comprise grout and explains how grouts are specified, batched, mixed, and placed. Test methods for grout and preparation of test specimens are explained.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1907 Categories: Construction, Grout, Masonry Testing, Materials, Member Discount-75, Special Inspection of Masonry Series$75.00