Special Inspection of Structural Masonry – All Lessons
Through this series of webinars, speakers address special inspection duties, masonry materials, construction, and protection items to be observed and verified by special inspections. A number of other topics of interest including testing, introduction to code requirements, and more are also reviewed. These recorded webinars are excellent preparatory instruction for those planning to the take the ICC Structural Masonry Special Inspection Examination.
This product provides access to all 9 Special Inspection of Structural Masonry lessons.
$500.00
Description
The Masonry Society is pleased to offer a series of 9 recorded webinars on special inspection of structural masonry, helpful for anyone who is or plans to become a Structural Masonry Special Inspector, or who is otherwise involved with special inspection and testing of masonry.
Through this series of webinars, speakers address special inspection duties, masonry materials, construction, and protection items to be observed and verified by special inspections. A number of other topics of interest including testing, introduction to code requirements, and more are also reviewed. These recorded webinars are excellent preparatory instruction for those planning to the take the ICC Structural Masonry Special Inspection Examination.
A comprehensive set of handout materials based on the presentations is provided. Viewers are encouraged to have access to the IBC, TMS 402/602, the Reinforced Concrete Masonry Construction Inspector’s Handbook, and ASTM Standards to maximize their learning, especially if they plan to take the ICC Structural Masonry Special Inspection examination.
The presentations are targeted toward inspectors and field testing technicians, although mason contractors, materials suppliers, building code officials, engineers, architects, and laboratory personnel will also find the webinars informative.
Viewers will learn about structural masonry code inspection requirements, proper placement of materials, mortar and grout composition, how to determine the compressive strength of masonry, and appropriate severe weather procedures. This comprehensive series is aimed at helping inspectors, testing technicians, engineers, and building officials identify and verify key quality assurance items on the job site.
Related products
-
Design
Strength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
$75.00 Add to cartStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2104 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Design
Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2103 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Masonry 101 #2 – Introduction to Masonry Units
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2005 Categories: Masonry 101 Series, Member Discount-75, Veneer$75.00