Strength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00
Description
Shear walls are critical building elements to resist in-plane loads and are, for masonry, the seismic-force-resisting system. This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Learning Objectives:
- Introduce masonry shear walls and applied loads on these critical elements
- Discuss seismic detailing requirements for masonry shear walls
- Review the strength design provisions for masonry shear walls for combined axial load and bending and for shear
- Overview maximum and minimum reinforcement limits and detailing of shear walls
Related products
-
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2009 Categories: Construction, Masonry 101 Series, Member Discount-75$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1911 Categories: Masonry Testing, Member Discount-75, Special Inspection of Masonry Series$75.00 -
Special Inspection of Structural Masonry – All Lessons
Through this series of webinars, speakers address special inspection duties, masonry materials, construction, and protection items to be observed and verified by special inspections. A number of other topics of interest including testing, introduction to code requirements, and more are also reviewed. These recorded webinars are excellent preparatory instruction for those planning to the take the ICC Structural Masonry Special Inspection Examination.
This product provides access to all 9 Special Inspection of Structural Masonry lessons.
SKU: LMS1903-11 Categories: Materials, Member Discount-75, Special Inspection of Masonry Series$500.00