# Strength Design

Showing all 8 results

• ### Design of Masonry Shear Walls

The design of reinforced masonry shear walls using both the Allowable Stress Design method and the Strength Design method is covered in this lesson.

SKU: LMS1805
• ### Strength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies

This introductory session will review basic strength design concepts for masonry, noting key differences with procedures for concrete.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2101$75.00
• ### Strength Design of Masonry #2 – Strength Design of Beams

This session will review the design of masonry beams and lintels, including an examination of whether arching action can be used to reduce the loads on these elements.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2102$75.00
• ### Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads

During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2103$75.00
• ### Strength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing

This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2104$75.00
• ### Strength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior

Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2105$75.00
• ### Strength Design of Masonry #6 – Strength Design Requirements for Reinforcement & Connectors

Reinforcement and connectors are essential to ensure a proper load path in masonry buildings. This session will review basic detailing requirements for reinforcement and connectors, and specific requirements for strength design of masonry. Lap length requirements for reinforcement, and design of anchor bolts will be reviewed.

Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately. SKU: LMS2106$75.00