Strength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00
Description
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Learning Objectives:
- Introduce masonry column and pilaster elements
- Discuss required detailing of columns and pilasters
- Review the design of masonry columns
- Review the design masonry pilasters
- Discuss behavior of masonry building systems
- Introduce an overall design methodology for masonry structures
Related products
-
What’s New in LEED v4.1 – A Focus on Masonry
This course provides a summary of changes in LEED v4.1, with a focus on changes that are most likely of interest to the masonry industry.
SKU: LMS2002 Categories: Codes & Standards, Materials, Member Discount-75, Sustainability$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2007 Categories: Anchoring, Masonry 101 Series, Member Discount-75, Reinforcement$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1911 Categories: Masonry Testing, Member Discount-75, Special Inspection of Masonry Series$75.00