Masonry 101 #2 – Introduction to Masonry Units
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used. Units covered include concrete masonry units, clay masonry units, natural stone units, manufactured stone veneer units, cast stone units, and AAC masonry units. This lesson provides attendees with the foundational information needed to recognize different types of masonry units, identify their defining characteristics, correctly specify them, and understand typical applications.
Learning Objectives:
- Identify the different types of masonry units using visual characteristics
- Describe how common masonry units are manufactured/produced
- List the most relevant ASTM specifications for commonly used masonry units
- Explain the key differences between types of masonry units and ways they can be used
Related products
-
Design
Strength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
$75.00 Add to cartStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2105 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Design
Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2103 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2009 Categories: Construction, Masonry 101 Series, Member Discount-75$75.00 -
Special Inspection of Structural Masonry #7 – Reinforcing and Grouting
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1909 Categories: Grout, Member Discount-75, Reinforcement, Special Inspection of Masonry Series$75.00