Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00
Description
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. A newer confinement-steel option is available that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement. Join Ed Huston for an overview of this newer option based on the 2016 TMS 402 lap spice provisions.
Learning Objectives:
- Outline life safety issues related to lap splicing structural masonry reinforcement.
- Contrast 2018 IBC options for lap splicing structural masonry reinforcement.
- Identify IBC compliant “non-confined” masonry reinforcement lap splice detailing.
- Identify IBC compliant “confined” masonry reinforcement lap splice detailing.
Related products
-
Design
Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2103 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
SKU: LMS2001 Categories: Anchoring, Design, Member Discount-75$75.00 -
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2009 Categories: Construction, Masonry 101 Series, Member Discount-75$75.00 -
Codes & Standards
Special Inspection of Structural Masonry #1 – Introduction to Special Inspection
$75.00 Add to cartSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1903 Categories: Codes & Standards, Member Discount-75, Special Inspection of Masonry Series$75.00