Strength Design of Masonry #6 – Strength Design Requirements for Reinforcement & Connectors
Reinforcement and connectors are essential to ensure a proper load path in masonry buildings. This session will review basic detailing requirements for reinforcement and connectors, and specific requirements for strength design of masonry. Lap length requirements for reinforcement, and design of anchor bolts will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00
Description
Reinforcement and connectors are essential to ensure a proper load path in masonry buildings. This session will review basic detailing requirements for reinforcement and connectors, and specific requirements for strength design of masonry. Lap length requirements for reinforcement, and design of anchor bolts will be reviewed.
Learning Objectives:
- Discuss basic detailing requirements for reinforcement and connectors
- Review specific strength design requirements for reinforcement and connectors
- Overview development and lap splice requirements for reinforcement
- Review strength design of anchor bolts
Related products
-
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00 -
Masonry 101 #2 – Introduction to Masonry Units
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
This lesson is design to provide an understanding of the effects of hot and cold weather on masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It defines conditions that are considered either hot or cold. As it relates to protecting new masonry, this lesson explains steps that should be taken by the contractor (and verified by the inspector) to prepare for construction, to do during construction, and to do immediately following construction.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00