Special Inspection of Structural Masonry #5 – Grout
This lesson is designed to provide a thorough understanding of grout for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of grout for masonry construction, both fine and coarse, as well as conventional and self-consolidating mixes, and desirable properties for all of these. It describes the materials that comprise grout and explains how grouts are specified, batched, mixed, and placed. Test methods for grout and preparation of test specimens are explained.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson is designed to provide a thorough understanding of grout for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of grout for masonry construction, both fine and coarse, as well as conventional and self-consolidating mixes, and desirable properties for all of these. It describes the materials that comprise grout and explains how grouts are specified, batched, mixed, and placed. Test methods for grout and preparation of test specimens are explained.
Related products
-
Design
Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2103 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
SKU: LMS2001 Categories: Anchoring, Design, Member Discount-75$75.00 -
What’s New in LEED v4.1 – A Focus on Masonry
This course provides a summary of changes in LEED v4.1, with a focus on changes that are most likely of interest to the masonry industry.
SKU: LMS2002 Categories: Codes & Standards, Materials, Member Discount-75, Sustainability$75.00 -
Special Inspection of Structural Masonry #7 – Reinforcing and Grouting
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1909 Categories: Grout, Member Discount-75, Reinforcement, Special Inspection of Masonry Series$75.00