© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Special Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
This lesson is design to provide an understanding of the effects of hot and cold weather on masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It defines conditions that are considered either hot or cold. As it relates to protecting new masonry, this lesson explains steps that should be taken by the contractor (and verified by the inspector) to prepare for construction, to do during construction, and to do immediately following construction.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson is design to provide an understanding of the effects of hot and cold weather on masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It defines conditions that are considered either hot or cold. As it relates to protecting new masonry, this lesson explains steps that should be taken by the contractor (and verified by the inspector) to prepare for construction, to do during construction, and to do immediately following construction.
Related products
-
DesignStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
$75.00 Add to cartStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
This introductory session will review basic strength design concepts for masonry, noting key differences with procedures for concrete.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00 -
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
$75.00 Add to cartSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar. It describes the materials that comprise mortar and explains how mortars are specified, batched, and mixed. Mixing considerations necessarily include good practices for hot and cold weather construction and the additional care required for colored mortar, both for materials and mixing requirements. This lesson briefly describes quality assurance and quality control for mortar, the difference between QA and QC, and typical reporting requirements related to that.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00