© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Design of Masonry Shear Walls
The design of reinforced masonry shear walls using both the Allowable Stress Design method and the Strength Design method is covered in this lesson.
$75.00
Description
The design of reinforced masonry shear walls using both the Allowable Stress Design method and the Strength Design method is covered in this lesson. The requirements for both the design for overturning and the design for shear are explained. The prescriptive seismic detailing requirements for each of three reinforced masonry shear walls types, ordinary, intermediate, and special, are explained, with particular attention to special reinforced shear walls. The design process is illustrated with examples.
Learning Objectives:
- Understand the three different types of reinforced masonry shear walls and the requirements for each type.
- Understand seismic design requirements for shear walls.
- Understand the design process for shear walls using the Allowable Stress Design method.
- Understand the design process for shear walls using the Strength Design method.
Related products
-
DesignStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
$75.00 Add to cartStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Sale!
Codes & StandardsTMS 402/602-16 Code and Specification Update
Original price was: $75.00.$50.00Current price is: $50.00. Add to cartTMS 402/602-16 Code and Specification Update
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
Original price was: $75.00.$50.00Current price is: $50.00. -
Anchor Bolt Design
This lesson covers the basis for these changes two major changes to the anchor bolt design provisions in the 2016 edition of TMS 402. One change was to increase the calculated shear crushing strength by 67%. The other change was to go from a linear interaction equation for combined bending and shear to an elliptical interaction equation.
$75.00 -
Special Inspection of Structural Masonry
This lesson will overview special inspection, review changes, and highlight key inspection tasks. Tips for preparing a quality assurance plan by the design team will be given, and key inspection items will be reviewed so that contractors and inspectors understand the importance of ensuring compliance of these items.
$75.00