© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Masonry Façade Inspections – Best Practices and Tips
Façade inspections are critical to building enclosure performance and integrity. Discover the best practices in façade inspections through the use of The Masonry Society’s “Guideline for Masonry Façade Condition Assessment” (TMS-1700-17).
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
$75.00
Description
Façade inspections are critical to building enclosure performance and integrity. Discover the best practices in façade inspections through the use of The Masonry Society’s “Guideline for Masonry Façade Condition Assessment” (TMS-1700-17). See examples of how to conduct a façade inspection on an existing building with photos of actual conditions in the field. Learn how to incorporate investigative techniques into a façade inspection to help guide your diagnosis of façade distress and obtain critical information for designing repairs.
Related products
-
Rational Design of Masonry Veneers and Shelf Angle Supports
Chapter 12 of the TMS 402 2016 includes provisions for the design of anchored and adhered masonry veneer. Although the vast majority of anchored masonry veneer systems are designed using the prescriptive provisions within this standard, veneers in high wind zones, high seismic zones, or constructed with large distances between the backing walls and the veneer cannot be designed using these prescriptive provisions. In addition, the prescriptive provisions do not often provide the most cost-effective solutions for the rehabilitation and retrofit of masonry veneers. The TMS 402 does have provisions for alternative rational design provisions for masonry veneers. These provisions are explained and a method for the rational veneer wall system design are presented. This lesson also describes a method for the design of the vertical Shelf angle support of the walls systems.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
$75.00 -
Specifying the Right Mortar and Grout for your Projects
This lesson reviews current cementitious materials that are allowed by ASTM mortar (C270) and grout (C476) specifications, provides a description of each type of cement, discusses key properties of mortar and grout, and shows how to specify cements for mortar and grout efficiently and effectively.
$75.00 -
Design of Masonry Shear Walls
The design of reinforced masonry shear walls using both the Allowable Stress Design method and the Strength Design method is covered in this lesson.
$75.00 -
Masonry Testing 101
Proper testing of masonry products is essential to ensure that materials meet project requirements. Proper testing procedures for masonry products is covered in this lesson and typical mistakes made will also be presented.
$75.00