© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Longmont Ledger
Special Inspection of Structural Masonry #1 – Introduction to Special Inspection
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Related products
-
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
This lesson will review the basics of masonry construction so that those observing or accessing that construction are aware of common procedures and practices. Tolerances of units and construction will be reviewed so that those constructing masonry, or judging that construction know whether the resulting work is reasonable and within common tolerances. Movement joints including control joints and expansion joints will also be reviewed as to why they may be needed, what is important to make them function properly, and how they are commonly constructed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
AnchoringSpecial Inspection of Structural Masonry #3 – Reinforcement and Connectors
$75.00 Add to cartSpecial Inspection of Structural Masonry #3 – Reinforcement and Connectors
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00