TMS 402/602-16 Code and Specification Update
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
$75.00 $50.00
Description
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents…
Related products
-
Specifying the Right Mortar and Grout for your Projects
This lesson reviews current cementitious materials that are allowed by ASTM mortar (C270) and grout (C476) specifications, provides a description of each type of cement, discusses key properties of mortar and grout, and shows how to specify cements for mortar and grout efficiently and effectively.
SKU: LMS1806 Categories: Free for Members, Grout, Materials, Mortar$75.00 -
Masonry Testing 101
Proper testing of masonry products is essential to ensure that materials meet project requirements. Proper testing procedures for masonry products is covered in this lesson and typical mistakes made will also be presented.
SKU: LMS1804 Categories: Codes & Standards, Free for Members, Masonry Testing, Materials$75.00 -
Nondestructive Evaluation and Testing of Masonry
Nondestructive evaluation methods are valuable approaches for evaluating conditions of existing masonry construction without causing damage. Masonry strength can also be measured in place using in situ test methods, without resorting to destructive sample removal for laboratory testing.
SKU: LMS1704 Categories: Construction, Free for Members, Grout, Masonry Testing, Mortar, Reinforcement$75.00 -
Exterior Masonry Walls and Energy Code Compliance
This lesson provides an overview of energy code provisions, reviews energy studies performed utilizing whole building analysis, and provides recommendations for cost effective energy efficient solutions for energy efficient exterior masonry wall designs.
SKU: LMS1703 Categories: Codes & Standards, Free for Members$75.00