© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Longmont Ledger
Strength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00
Description
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed. Methods to consider secondary bending moments will be examined, including using P-delta provisions, and key points on interaction diagrams will be reviewed. Differences in the strength design provisions and allowable stress design will be briefly discussed.
Learning Objectives:
- Review the design of walls loaded with out-of-plane with axial loads
- Identify methods to consider secondary bending moment
- Review P-delta provisions for secondary bending moment
- Describe basic differences between allowable stress design and strength design for such walls
Related products
-
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Masonry 101 #3 – Mortar
This lesson provides a comprehensive introduction to mortar for masonry construction, especially for those who have little to no experience with masonry but find themselves needing to design or review projects.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Codes & StandardsSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
$75.00 Add to cartSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00