© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Related products
-
DesignStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
$75.00 Add to cartStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
$75.00 Add to cartSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar. It describes the materials that comprise mortar and explains how mortars are specified, batched, and mixed. Mixing considerations necessarily include good practices for hot and cold weather construction and the additional care required for colored mortar, both for materials and mixing requirements. This lesson briefly describes quality assurance and quality control for mortar, the difference between QA and QC, and typical reporting requirements related to that.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Codes & StandardsSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
$75.00 Add to cartSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00