Assessment, Maintenance, and Repair of Transitional Masonry Structures #5: Rehabilitation Options for Transitional Masonry
Once the assessment is complete and the deterioration mechanisms are known, rehabilitation options can be considered. This session introduces rehabilitation options for the transitional masonry wall system to be considered based on deterioration mechanisms, including those related to structural concerns and water management. The session discusses the potential influence of the Secretary of the Interior Standards for the Treatment of Historic Properties in rehabilitation options as they apply to these buildings.
During Existing Masonry Night School: Assessment, Maintenance, and Repair of Transitional Masonry Structures, instructors discuss the most common issues in assessing, maintaining, and where needed, repairing masonry cladding systems constructed in North America between the 1880 and 1945.
View other courses in this series or purchase the Existing Masonry Bundle to access all 7 and save 10% compared to buying them separately.
$75.00
Description
Related products
-
Design
Strength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
$75.00 Add to cartStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
This introductory session will review basic strength design concepts for masonry, noting key differences with procedures for concrete.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2101 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1911 Categories: Masonry Testing, Member Discount-75, Special Inspection of Masonry Series$75.00 -
Construction
Special Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
This lesson is design to provide an understanding of the effects of hot and cold weather on masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It defines conditions that are considered either hot or cold. As it relates to protecting new masonry, this lesson explains steps that should be taken by the contractor (and verified by the inspector) to prepare for construction, to do during construction, and to do immediately following construction.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1910 Categories: Construction, Member Discount-75, Special Inspection of Masonry Series$75.00 -
Materials
Special Inspection of Structural Masonry #2 – Introduction to Masonry Units
$75.00 Add to cartSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
This lesson will review the basics of masonry unit production and properties with a specific focus on those items inspectors and construction personnel would need to know about or confirm. Common concrete masonry units and clay masonry units will be discussed, along with key differences in these materials. Limitations on manufacturing that need to be understood by those using the units will be discussed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1904 Categories: Materials, Member Discount-75, Special Inspection of Masonry Series$75.00