Assessment, Maintenance, and Repair of Transitional Masonry Structures #6: Implementation of a Rehabilitation Project for Transitional Masonry
Once an assessment is complete and a rehabilitation approach has been selected, implementing the rehabilitation work is the next milestone. Bid documents for rehabilitation projects of traditional masonry wall systems should address two fundamental issues. First, all existing conditions, particularly concealed conditions, are not known and can’t be known until the work begins. Further, these conditions are progressively revealed as the work progresses. Second, the as-built geometry of the concealed portions of assembly may differ from what was revealed during the investigation or what was shown on the drawings. These geometries and concealed conditions could require modifications of the assumed repair details and potentially the scope and extent of repairs. Once the repair work begins, interaction and communication between the contractor, designer and owner are critical to the success of the project and controlling project costs. This session introduces the basic approaches for implementation of the rehabilitation including document preparation and field implementation of the repairs.
During Existing Masonry Night School: Assessment, Maintenance, and Repair of Transitional Masonry Structures, instructors discuss the most common issues in assessing, maintaining, and where needed, repairing masonry cladding systems constructed in North America between the 1880 and 1945.
View other courses in this series or purchase the Existing Masonry Bundle to access all 7 and save 10% compared to buying them separately.
$75.00
Description
Related products
-
Lintels in Masonry Walls
This lesson reviews the behavior and load distribution of a lintel within a wall, to help design this common element more effectively and efficiently.
SKU: LMS1902 Categories: Design, Member Discount-75$75.00 -
Masonry 101 #4 – Reinforcement and Anchors
This lesson covers types of reinforcement used in masonry, including bars, joint reinforcement, anchors and ties. Each type of reinforcement will be explored, and the use in masonry will be identified.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2007 Categories: Anchoring, Masonry 101 Series, Member Discount-75, Reinforcement$75.00 -
Masonry 101 #1 – Introduction to Masonry
This lesson introduce masonry to the attendees, reviewing basic terminology, acronyms, properties, benefits, and uses of masonry.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS2004 Categories: Design, Masonry 101 Series, Member Discount-75$75.00 -
Anchoring
Special Inspection of Structural Masonry #3 – Reinforcement and Connectors
$75.00 Add to cartSpecial Inspection of Structural Masonry #3 – Reinforcement and Connectors
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1905 Categories: Anchoring, Member Discount-75, Reinforcement, Special Inspection of Masonry Series$75.00