This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout.…
This lesson will review the basics of masonry construction so that those observing or accessing that construction are aware of common procedures and practices. Tolerances of units and construction will be reviewed so that those constructing masonry, or judging that construction know whether the resulting work is reasonable and within common tolerances.…
This lesson is designed to provide a thorough understanding of grout for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of grout for masonry construction, both fine and coarse, as well as conventional and self-consolidating mixes, and desirable properties for all of these. It…
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar.…
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Presenter: Phillip Samblanet, The Masonry Society
Date Presented: September 19, 2019
Credit: 1 PDH / 0.10 CEU
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle.…
This lesson will review the basics of masonry unit production and properties with a specific focus on those items inspectors and construction personnel would need to know about or confirm. Common concrete masonry units and clay masonry units will be discussed, along with key differences in these materials.…
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed.…
This lesson reviews the behavior and load distribution of a lintel within a wall, to help design this common element more effectively and efficiently. Lintel design basics will be reviewed, including possible arch analysis, code requirements specific to lintels, design criteria, and the various options we have in selecting lintels in masonry walls.…
Chapter 12 of the TMS 402 2016 includes provisions for the design of anchored and adhered masonry veneer. Although the vast majority of anchored masonry veneer systems are designed using the prescriptive provisions within this standard, veneers in high wind zones, high seismic zones, or constructed with large distances between the backing walls and the veneer cannot be designed using these prescriptive provisions.…
Façade inspections are critical to building enclosure performance and integrity. Discover the best practices in façade inspections through the use of The Masonry Society’s “Guideline for Masonry Façade Condition Assessment” (TMS-1700-17). See examples of how to conduct a façade inspection on an existing building with photos of actual conditions in the field.…
© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
