© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Longmont Ledger
Achieving Resilience: How Masonry Supports Resilient Designs
This course provides an overview of resilient design and discusses how resilient design is and is not covered by building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. Examples of resilient design strategies are provided.
Learning Objectives:
- Define resilience.
- Explain how resilient designs go beyond the minimum building code requirements.
- List at least three above-code standards that can be used with resilient designs.
- Describe inherent properties of masonry that provide resilience.
$75.00
Description
This course provides an overview of resilient design and discusses how resilient design is and is not covered by building codes and standards. The role of masonry construction in meeting resilient design goals is explained, and the inherent properties of masonry that make it resilient are described. Examples of resilient design strategies are provided.
Learning Objectives:
- Define resilience.
- Explain how resilient designs go beyond the minimum building code requirements.
- List at least three above-code standards that can be used with resilient designs.
- Describe inherent properties of masonry that provide resilience.
Related products
-
DesignStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00 -
Special Inspection of Structural Masonry #7 – Reinforcing and Grouting
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
$75.00 Add to cartSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar. It describes the materials that comprise mortar and explains how mortars are specified, batched, and mixed. Mixing considerations necessarily include good practices for hot and cold weather construction and the additional care required for colored mortar, both for materials and mixing requirements. This lesson briefly describes quality assurance and quality control for mortar, the difference between QA and QC, and typical reporting requirements related to that.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00