© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded. Structural assembly properties including the modulus of elasticity, modulus of rupture, and compressive strength will be introduced and discussed. Other assembly properties related to dimensional stability, fire resistance and energy performance will also be reviewed, along with resources that can be used for additional information on these topics.
Learning Objectives:
- Understand basic masonry Assemblies, construction techniques and the effects these have on Masonry Assembly Attributes
- Identify critical structural properties for masonry assemblies.
- Understand other material properties for masonry
- List other resources and topics for advanced studies
Related products
-
DesignStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
$75.00 Add to cartStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
Masonry 101 #2 – Introduction to Masonry Units
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00