© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Special Inspection of Structural Masonry #7 – Reinforcing and Grouting
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson will discuss how reinforcement and grout are placed in masonry walls and special precautions needed to ensure they are properly placed so that the reinforced masonry system performs properly. This includes tolerances on placement of reinforcement, and the cleanliness of spaces to be filled with grout. In addition, requirements to ensure adequate cover and protection to reinforcement to avoid corrosion of damage are reviewed.
Related products
-
DesignStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
$75.00 Add to cartStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
DesignStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
$75.00 Add to cartStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
Masonry 101 #5 – Grout
This lesson provides a comprehensive introduction to grouts and grouting for new masonry construction, especially for those who have little to no experience with masonry but find themselves needing to design or review projects.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00