Special Inspection of Structural Masonry #3 – Reinforcement and Connectors
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00
Description
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Related products
-
What’s New in LEED v4.1 – A Focus on Masonry
This course provides a summary of changes in LEED v4.1, with a focus on changes that are most likely of interest to the masonry industry.
SKU: LMS2002 Categories: Codes & Standards, Materials, Member Discount-75, Sustainability$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Construction
Special Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
$75.00 Add to cartSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar. It describes the materials that comprise mortar and explains how mortars are specified, batched, and mixed. Mixing considerations necessarily include good practices for hot and cold weather construction and the additional care required for colored mortar, both for materials and mixing requirements. This lesson briefly describes quality assurance and quality control for mortar, the difference between QA and QC, and typical reporting requirements related to that.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1906 Categories: Construction, Materials, Member Discount-75, Mortar, Special Inspection of Masonry Series$75.00 -
Materials
Special Inspection of Structural Masonry #2 – Introduction to Masonry Units
$75.00 Add to cartSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
This lesson will review the basics of masonry unit production and properties with a specific focus on those items inspectors and construction personnel would need to know about or confirm. Common concrete masonry units and clay masonry units will be discussed, along with key differences in these materials. Limitations on manufacturing that need to be understood by those using the units will be discussed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1904 Categories: Materials, Member Discount-75, Special Inspection of Masonry Series$75.00