Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00
Description
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples. Content will also include a summary of available code and design guide provisions and their application. Hand analysis and FEA methods will be illustrated.
Learning Objectives:
- To recognize the differences in available anchoring systems for smaller and larger scale stone.
- To understand the design criteria for stone back-up systems and potential limitations and benefits.
- To know prescriptive approaches for small scale stone anchorage and when engineered design is required.
- To have been presented design methodology for large scale stone anchors and their fasteners including hand and computer techniques.
Related products
-
Design
Strength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
$75.00 Add to cartStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
This introductory session will review basic strength design concepts for masonry, noting key differences with procedures for concrete.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
SKU: LMS2101 Categories: Design, Member Discount-75, Strength Design, Strength Design Series$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
SKU: LMS2003 Categories: Codes & Standards, Design, Member Discount-75$75.00 -
Construction
Special Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #8 – Hot and Cold Weather Construction
This lesson is design to provide an understanding of the effects of hot and cold weather on masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It defines conditions that are considered either hot or cold. As it relates to protecting new masonry, this lesson explains steps that should be taken by the contractor (and verified by the inspector) to prepare for construction, to do during construction, and to do immediately following construction.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1910 Categories: Construction, Member Discount-75, Special Inspection of Masonry Series$75.00 -
Construction
Special Inspection of Structural Masonry #6 – Basic Masonry Construction
$75.00 Add to cartSpecial Inspection of Structural Masonry #6 – Basic Masonry Construction
This lesson will review the basics of masonry construction so that those observing or accessing that construction are aware of common procedures and practices. Tolerances of units and construction will be reviewed so that those constructing masonry, or judging that construction know whether the resulting work is reasonable and within common tolerances. Movement joints including control joints and expansion joints will also be reviewed as to why they may be needed, what is important to make them function properly, and how they are commonly constructed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
SKU: LMS1908 Categories: Construction, Member Discount-75, Special Inspection of Masonry Series$75.00