© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Allowable Stress Design of Masonry #5: Design of Columns and Pilasters & Out of Plane Load Distribution
Shear walls are critical building elements to resist in-plane loads and are, for masonry, the wind and seismic-force-resisting system. This session reviews Allowable Stress Design of shear walls along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls. Design for in-plane shear, including shear friction, and in-plane flexure is explored and examples provided. The effect of openings are also be examined.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00
Description
Shear walls are critical building elements to resist in-plane loads and are, for masonry, the wind and seismic-force-resisting system. This session reviews Allowable Stress Design of shear walls along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls. Design for in-plane shear, including shear friction, and in-plane flexure is explored and examples provided. The effect of openings are also be examined.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
Related products
-
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00 -
Masonry 101 #3 – Mortar
This lesson provides a comprehensive introduction to mortar for masonry construction, especially for those who have little to no experience with masonry but find themselves needing to design or review projects.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry #5 – Grout
This lesson is designed to provide a thorough understanding of grout for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of grout for masonry construction, both fine and coarse, as well as conventional and self-consolidating mixes, and desirable properties for all of these. It describes the materials that comprise grout and explains how grouts are specified, batched, mixed, and placed. Test methods for grout and preparation of test specimens are explained.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
MaterialsSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
$75.00 Add to cartSpecial Inspection of Structural Masonry #2 – Introduction to Masonry Units
This lesson will review the basics of masonry unit production and properties with a specific focus on those items inspectors and construction personnel would need to know about or confirm. Common concrete masonry units and clay masonry units will be discussed, along with key differences in these materials. Limitations on manufacturing that need to be understood by those using the units will be discussed.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00