Nondestructive Evaluation and Testing of Masonry
Nondestructive evaluation methods are valuable approaches for evaluating conditions of existing masonry construction without causing damage. Masonry strength can also be measured in place using in situ test methods, without resorting to destructive sample removal for laboratory testing.
$75.00
Description
Nondestructive evaluation methods are valuable approaches for evaluating conditions of existing masonry construction without causing damage. Masonry strength can also be measured in place using in situ test methods, without resorting to destructive sample removal for laboratory testing. Methods discussed during this lesson include mortar hardness testing, pulse velocity measurements, surface penetrating radar, infrared thermography, flatjack testing, and in situ shear tests, with special emphasis on applying these methods for diagnosing both historic and modern masonry construction. This lesson also covers the process of planning an investigation following published codes and guidelines.
Learning Objectives:
- Describe key design properties needed for retrofit or renovation of existing masonry structures.
- Define nondestructive and minimally invasive masonry evaluation techniques.
- Identify 2 methods for locating grout and reinforcement in modern masonry construction.
- Plan the number of tests needed for evaluating in situ masonry strength.
Related products
-
Historic MasonryAssessment, Maintenance, and Repair of Transitional Masonry Structures #1: Review of Common Masonry Materials
$75.00 Add to cartAssessment, Maintenance, and Repair of Transitional Masonry Structures #1: Review of Common Masonry Materials
This session reviews masonry materials commonly used in cladding systems between the 1880 and 1945 in North America, including brick, terra cotta, concrete masonry, cast stone, natural stone, and mortar. Common material properties, uses, and deterioration mechanisms will be presented.
It is recommended that attendees watch Masonry 101 – Introduction to Masonry Units before watching this webinar in order to become familiar with the terminology used. Purchasing this course also provides free access to that course.
During Existing Masonry Night School: Assessment, Maintenance, and Repair of Transitional Masonry Structures, instructors discuss the most common issues in assessing, maintaining, and where needed, repairing masonry cladding systems constructed in North America between the 1880 and 1945.
View other courses in this series or purchase the Existing Masonry Bundle to access all 7 and save 10% compared to buying them separately.
$75.00 -
Sale!
Codes & StandardsTMS 402/602-16 Code and Specification Update
Original price was: $75.00.$50.00Current price is: $50.00. Add to cartTMS 402/602-16 Code and Specification Update
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
Original price was: $75.00.$50.00Current price is: $50.00. -
Design of Movement and Control Joints for Masonry
This lesson addresses the movement characteristics of masonry wall systems, and compares the differences between architectural veneer and structural reinforced masonry. Focus is on best practice for design and construction of expansion and control joints to accommodate and/or restrict masonry material movement.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00