© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Strength Design of Masonry #2 – Strength Design of Beams
This session will review the design of masonry beams and lintels, including an examination of whether arching action can be used to reduce the loads on these elements.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00
Description
This session will review the design of masonry beams and lintels, including an examination of whether arching action can be used to reduce the loads on these elements. Deflection calculations will be reviewed, along with detailing requirements to meet code minimum and maximum reinforcement percentages. Deep beam requirements will also be covered.
Learning Objectives:
- Introduce the design masonry beams and lintels for bending moment and shear
- Describe deflection calculations for beams and lintels
- Review maximum and minimum reinforcing provisions
- Examine arching and discuss when it can be used
Related products
-
Masonry 101 #6 – Masonry Assemblies
This lesson looks at the properties of masonry assemblies based on the how it is constructed and bonded.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Masonry 101 #2 – Introduction to Masonry Units
This lesson introduces attendees to the most common types of masonry units, how they are made, and how they are commonly used.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry #9 – Testing
This lesson will review common masonry tests and sampling methods as well as when such test may be appropriate and required by the Quality Assurance/Quality Control programs. Common errors in testing will be discussed to try to reduce such errors from being replicated in the future. Destructive and non-destructive tests and evaluation methods will briefly be reviewed for situations where construction testing was not performed, was not performed properly, or when results are suspect.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
ConstructionSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
$75.00 Add to cartSpecial Inspection of Structural Masonry #4 – Mortar and Mortar Mixing
This lesson is designed to provide a thorough understanding of mortar for new masonry construction, especially as it pertains to the responsibilities of a Special Inspector. It describes the purpose of mortar joining masonry units and the desirable properties of fresh and hardened mortar. It describes the materials that comprise mortar and explains how mortars are specified, batched, and mixed. Mixing considerations necessarily include good practices for hot and cold weather construction and the additional care required for colored mortar, both for materials and mixing requirements. This lesson briefly describes quality assurance and quality control for mortar, the difference between QA and QC, and typical reporting requirements related to that.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00