© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Allowable Stress Design of Masonry #1: Introduction to Allowable Stress Design
This introductory course reviews basic allowable stress design concepts. Dr. McGinley presents key differences between allowable stress design and strength design procedures. This session also reviews masonry assemblies and systems, noting their purposes and resistance to primary loads. Attendees will learn about typical masonry building elements and their roles in the overall structural system including walls, beams, columns, and pilasters. Future sessions of the series discuss the design of these elements. Finally, this session reviews loads and load combinations from ASCE-7 & and the IBC.
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
$75.00
Description
This introductory course reviews basic allowable stress design concepts. Dr. McGinley presents key differences between allowable stress design and strength design procedures. This session also reviews masonry assemblies and systems, noting their purposes and resistance to primary loads. Attendees will learn about typical masonry building elements and their roles in the overall structural system including walls, beams, columns, and pilasters. Future sessions of the series discuss the design of these elements. Finally, this session reviews loads and load combinations from ASCE-7 & and the IBC.
Learning Objectives:
- Introduce Allowable Stress design concepts for masonry
- Classify different types of masonry systems
- Review the role of various masonry elements
- Identify common loadings on typical masonry building systems and elements
Allowable Stress Design of Masonry introduces Allowable Stress Design (ASD) of Masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. The series discusses design methodology as well as design for flexure, axial loads, and in-plane loads. It concludes with a review of requirements for reinforcement and connectors and detailing masonry effectively. It is recommended that you have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
View other courses in this series or purchase the Allowable Stress Design Bundle to access all 6 and save $30 compared to buying them separately.
Related products
-
Masonry 101 #5 – Grout
This lesson provides a comprehensive introduction to grouts and grouting for new masonry construction, especially for those who have little to no experience with masonry but find themselves needing to design or review projects.
Get all 6 Masonry 101 lessons at a discounted rate when buying the Masonry 101 bundle. Members save an additional $50 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
AnchoringSpecial Inspection of Structural Masonry #3 – Reinforcement and Connectors
$75.00 Add to cartSpecial Inspection of Structural Masonry #3 – Reinforcement and Connectors
This lesson will review common types of reinforcement, ties and anchors used in masonry along with requirements on their manufacture and use while discussing which ones are preferred and why.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Codes & StandardsSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
$75.00 Add to cartSpecial Inspection of Structural Masonry #1 – Introduction to Special Inspection
This lesson provides an overview of why special inspection of masonry is required, what needs to be inspected, and how often inspection is typically provided based on requirements in various codes, standards, and guides. Basic special inspection requirements for various masonry tasks are reviewed, and expectations on a special inspector are discussed. Requirements for testing certification of Special inspectors are briefly reviewed, along with texts, websites, and guides that may be of use to special inspectors in the field.
Get all 9 Special Inspection of Structural Masonry lessons at a discounted rate when buying the Special Inspection of Structural Masonry bundle. Members save an additional $175 off Member price and Non-Members save $75 compared to buying them separately.
$75.00 -
Special Inspection of Structural Masonry – All Lessons
Through this series of webinars, speakers address special inspection duties, masonry materials, construction, and protection items to be observed and verified by special inspections. A number of other topics of interest including testing, introduction to code requirements, and more are also reviewed. These recorded webinars are excellent preparatory instruction for those planning to the take the ICC Structural Masonry Special Inspection Examination.
This product provides access to all 9 Special Inspection of Structural Masonry lessons.
$500.00