© 2022 The Masonry Society. All Rights Reserved.
Custom website design by RunLocal Marketing, Longmont, CO
Longmont Ledger
TMS 402/602-16 Code and Specification Update
Sale!
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
Original price was: $75.00.$50.00Current price is: $50.00.
Description
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents…
Related products
-
Codes & StandardsTMS 402/602-22 Review #2: Major Structural Design Changes in TMS 402/602-22
$80.00 Add to cartTMS 402/602-22 Review #2: Major Structural Design Changes in TMS 402/602-22
This webinar will provide an overview of the major structural changes in TMS 402-22. One of the biggest changes was the introduction of compression-controlled sections in strength design. As a result of this, the maximum reinforcement provisions were deleted except for beams and intermediate and special shear walls under in-plane loads. The basis for the provisions, the impact on design, and some design aids will be presented.
Other structural changes that will be covered include: definition of net shear area particularly for beams, anchor bolt steel strength changing from being based on yield strength to ultimate strength, an increase of the allowable compressive force for masonry in allowable stress design, a change in the partially grouted shear wall factor, and an increase in the allowable shear friction strength as well as a change in the nominal shear friction strength for shear span ratios greater than 1. The potential impacts of these changes will also be reviewed.
Learning Objectives:
- Use the compression-controlled strength design provisions in TMS 402-22 and compare designs to TMS 402-16.
- Evaluate the change in anchor bolt steel strength in TMS 402-22
- Solve for shear friction strength for shear span ratios greater than 1 in TMS 402-22
- Name at least three other structural changes in TMS 402-22 and explain how they affect design
View other courses in this series or purchase the TMS 402/602-22 Review Bundle to access all 6 and save 10% compared to buying them separately.
$80.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
An Overview of the Role of Masonry in Sustainable Design and LEED v4
This lesson will address LEED v4 credit categories, with particular emphasis on the Materials and Resources credits, and identify how masonry products can contribute to sustainable design and LEED.
$75.00 -
Nondestructive Evaluation and Testing of Masonry
Nondestructive evaluation methods are valuable approaches for evaluating conditions of existing masonry construction without causing damage. Masonry strength can also be measured in place using in situ test methods, without resorting to destructive sample removal for laboratory testing.
$75.00