Shop
Showing 49–60 of 67 results
-
Stone Anchoring Solutions
This presentation focuses on anchoring design for natural or cast stone cladding of various sizes with emphasis on large scale or ‘dimensional’ stone. Stone anchoring system selection criteria will be presented followed by discussion of back-up system considerations and anchor design examples.
$75.00 -
Strength Design of Masonry
This lesson reviews the design assumptions for strength design, and look at the design of beams, bearing walls, and shear walls using strength design.
$75.00 -
Strength Design of Masonry – All Lessons
This 6-session course will introduce strength design of masonry, review code requirements, and examine designs of common masonry elements including, beams, walls, columns, and pilasters. Design methodology will be reviewed, as will design for flexure, axial loads, and in-plane loads. The course will conclude with a review of requirements for reinforcement and connectors and detailing masonry effectively. This course is an excellent way to learn strength design procedures. Those taking the course should have a basic familiarity with masonry (consistent with content presented in the Masonry 101 Series).
Presented by John Hochwalt, PE, SE, KPFF Consulting Engineers & Richard M. Bennett, PhD., PE, University of Tennessee
- Session 1 – Introduction to Strength Design of Masonry and Design Methodologies
- Session 2 – Strength Design of Beams
- Session 3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
- Session 4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
- Session 5 – Strength Design of Columns and Pilasters & System Behavior
- Session 6 – Strength Design Requirements for Reinforcement & Connectors
This product provides access to all 6 Strength Design of Masonry lessons.
$420.00 -
DesignStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
$75.00 Add to cartStrength Design of Masonry #1 – Introduction to Strength Design of Masonry and Design Methodologies
This introductory session will review basic strength design concepts for masonry, noting key differences with procedures for concrete.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Strength Design of Masonry #2 – Strength Design of Beams
This session will review the design of masonry beams and lintels, including an examination of whether arching action can be used to reduce the loads on these elements.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
DesignStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
$75.00 Add to cartStrength Design of Masonry #3 – Strength Design of Walls for Axial Load and Out-of-Plane Loads
During this session, design of masonry walls loaded with out-of-plane loads and axial loads will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
DesignStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
$75.00 Add to cartStrength Design of Masonry #4 – Strength Design of Walls for In-Plane Loads & Seismic Detailing
This session will review strength design of shear walls, along with both seismic detailing requirements and minimum/maximum detailing requirements for such walls.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
DesignStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
$75.00 Add to cartStrength Design of Masonry #5 – Strength Design of Columns and Pilasters & System Behavior
Masonry columns and pilasters are often used in masonry buildings to carry large, concentrated loads, and, for pilasters, to support walls subjected to out-of-plane loads. Required detailing of these elements will be reviewed and strength design provisions will be introduced for these elements. This session of also looks at several sample masonry buildings to discuss system behavior and overall design methodology for masonry structures.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
AnchoringStrength Design of Masonry #6 – Strength Design Requirements for Reinforcement & Connectors
$75.00 Add to cartStrength Design of Masonry #6 – Strength Design Requirements for Reinforcement & Connectors
Reinforcement and connectors are essential to ensure a proper load path in masonry buildings. This session will review basic detailing requirements for reinforcement and connectors, and specific requirements for strength design of masonry. Lap length requirements for reinforcement, and design of anchor bolts will be reviewed.
Get all 6 Strength Design of Masonry lessons at a discounted rate when buying the Strength Design of Masonry bundle. Save $30 compared to buying them separately.
$75.00 -
Structural Masonry Detailing: Confined Lap Splices
Most designers who engineer reinforced masonry know that code provisions for lap splice lengths have been evolving over the past few code editions. This course provides an overview of a newer confinement-steel option that has the potential to significantly reduce the lap splice lengths, especially for larger diameter bars, through confinement of the structural reinforcement.
$75.00 -
Sale!Codes & Standards
TMS 402/602-16 Code and Specification Update
Original price was: $75.00.$50.00Current price is: $50.00. Add to cartTMS 402/602-16 Code and Specification Update
The TMS 402/602-16 (formerly designated as TMS 402/ACI 530/ASCE 5 and TMS 602/ASCE 530.1/ASCE 6) has been released and adopted by the 2018 edition of the International Building Code and International Residential Code for the design and construction of structural masonry, masonry veneer, and glass unit masonry.
This lesson provides updates for the major updates and changes to the 2016 TMS 402/602, with a short review on changes that will be made in the 2018 International Building Code’s masonry provisions. The 1.5 hour video is presented by Dr. Richard M. Bennett, Chair of the Committee that developed these provisions.
This lesson is intended for designers, contractors, and others to help them understand the main updates made to these codes and standards from the earlier TMS 402/602-13 and the 2015 IBC. It is assumed that the user has familiarity with those earlier documents.
This course is free to TMS Members. See more membership benefits and become a member here. If you’re already a Member, log in to access this course from your Course Dashboard.
Original price was: $75.00.$50.00Current price is: $50.00. -
Publications
TMS 402/602-22 Building Code Requirements and Specification for Masonry Structures
$200.00 Purchase separately from the TMS eStoreTMS 402/602-22 Building Code Requirements and Specification for Masonry Structures
TMS 402/602-22 Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-22) and Specification for Masonry Structures (TMS 602-22). The Code (TMS 402) covers the design and construction of masonry structures while the Specification (TMS 602) is concerned with minimum construction requirements for masonry in structures.
The new 2022 edition has been updated throughout for new referenced standards, including ASCE/SEI 7-22 and numerous ASTM Standards. Other major changes to the TMS 402/602-22 include:
- New, more rational, masonry veneer provisions
- New Appendix D on composite reinforcement in masonry
- Updated and refined provisions throughout, including compression-controlled section requirements
$200.00
